UPVC Door Hinge Repair Near Me

Composite doors are a popular option for homeowners due to their durability, affordability, and energy efficiency. Like all things, composite doors can be damaged over time.

Fortunately, upvc door hinge repair near me is fairly simple and affordable to do. Here are some common problems with hinges made of upvc and some tips on how to repair them.

1. Slack Hinges

Doors play an important part in our lives. In time, they get out of line, crooked, and provide security and privacy. If your doors aren't easy to open or close, it may have hinges that are slack. Simple fixes can allow them to hang straight and work smoothly.

A slack or loose hinge can be caused by missing or loose screws, screwholes that are stripped, or an old hinge pin. In a majority of cases tightening the screw may fix the problem. If your screws are stripped they will need to be removed and replaced with longer, stronger screws. Filling the holes with wood glue and wooden dowels is the most effective method to fix the problem. This will allow the screws to grip into fresh wood and will keep the problem from happening in the future.


Make sure you have the following supplies prior to starting the project:

Remove the hinge screws from the door frame and jamb. If the jamb and hinge are painted, you'll require a knife to cut around the hinge to avoid damage to the paint. Once the screws have been removed, you need to clean any debris from the screw holes and then bore them out. Apply carpenter's glue to a wooden dowel measuring 3/8-inch in diameter and insert it into each hole until it is flush against the jamb's surface. Repeat this process for the remaining screw holes.

Then, polish the dowels to smooth them and ensure that they are even. When the dowels are smooth and even, you can make holes in them with a 1/8-inch wood drill. Then, you can fill the holes with wood glue and re-install the hinges.

You can also reduce the slack in the hinge by adjusting the distance between the two leaves. This is known as swaging. This can be done by hand or using an instrument that is specially designed that bends the leafs towards each other to create a narrower gap between the leafs once closed. Swaging can be applied to both right and left handed hinges.

2. Detached Hinges

Certain uPVC doors may drop slightly after they are installed However, this can usually be corrected by adjusting the door hinges. This can be done using either a screwdriver, or an Allen key, based on the kind of uPVC hinge on your door. To ensure that the hinges are not damaged, it is recommended that you open the uPVC doors while making these adjustments.

If your uPVC door hinges are misaligned they could cause a number of problems such as the door not closing properly, and draughts around the frame. Check that the gap between the frame and the door is equal all the way around with a spirit-level. Verify that the latch of your uPVC doors is caught on the strike plate when you close the door.

To begin adjusting your uPVC hinges for doors, loosen the screws on the door's side with a screwdriver or Allen key. Then move the hinges in the desired direction by turning the adjustment screw. It is usually the screw that is on the top or bottom on the hinge, depending on the style of hinge. To avoid damaging the door by over-adjusting it and causing more issues, it is recommended that you check the door after each adjustment.

There are several different types of uPVC door hinges however the most popular hinges include flag hinges as well as T hinges. Both hinges can be adjusted in the same manner, however T hinges feature an additional adjustment screw to adjust compression. Use the screw to tighten or loosen the hinges until the door opens and closes without a problem.

If your uPVC door hinges have become detached, you can repair them by applying wood glue or wood filler to the place in which they are missing from the door or frame. Let the filler cure before replacing the screws. You can also paint over the area you filled to match the color of your door. You can also replace the hinges by taking them off them, removing the screws and replacing them with new ones. If you don't feel comfortable repairing hinges yourself it is recommended to seek out an expert locksmith.

3. Broken Hinges

Over time, hinges may be damaged or even break. This can be caused by many factors, including physical impacts or wear and tear and environmental conditions. Fortunately, most of these issues can be addressed with simple steps. Adhesive can be used to strengthen the hinge that has cracked. To ensure proper operation, loose screws can also be tightened or replaced. If the damage is serious, it might be necessary to seek out a professional technician.

Over time, the weight of a heavy door can cause the screw holes in hinges to strip. This can result in broken or loose hinges. In some instances the hinge pins may be able to climb out of the barrel of the hinge and fall onto the floor, according to Family Handyman. Replace the hinge pins when you detect the issue and then fill in any stripped out screw holes before putting screws back to place.

Get a person to hold the door and tap the head pin using the hammer on a solid surface. This will create a small bend in the hinge pin and prevent it from falling out of the barrel again. You can also replace the hinge pins with new ones that have bent the knuckles, or a smoother hinge barrel.

4. Hinges that are misaligned

Over time the hinges on doors can shift due to the pressure they're under. A misaligned hinge can result in the door scraping against the floor or against the door frame creating damage and making it harder for you to open and close the door. repairs to upvc doors repairmywindowsanddoors.co.uk is quite common and can happen for a variety of reasons, from settling of the house to normal wear and tear. There are a few things you can do to make sure that your doors are functioning properly and not causing you problems.

The kind of hinges you have can also impact the performance. Doors with heavy weights put more stress on hinges than lighter doors, which may cause them to loosen with time. This is particularly relevant if the hinges aren't built to withstand the weight of the door. Other factors can affect the hinges of your door, for instance changes in humidity and temperature. These could cause wood to expand or contract, loosen screws, or even cause warping of the frame.

Often, all you need to fix a misaligned hinge is to tighten the screw. If, however, the screw holes are stripped, you'll need to replace them with longer screws to ensure a solid hold. To do this, use a self-centering drill bit to bore holes at both ends of the hinge leaf. Then, you can remove the old hinge assembly and clean the contact points at which the replacement will be mounted and then mount the new hinge by aligning the hinge leaves with the screw holes. Make sure to tighten the mounting screws by hand to hold the new hinge in the position.

Make sure that the bottom hinge is parallel to the floor and that the top hinge is parallel to the latch side of the door jamb. If you are not satisfied with the outcome, you can adjust the hinge's location and tighten back the screw. You could also try putting some shims behind the hinges in order to help them align. If the issue is because of the door being pushed against the frame, you could shift the latch side of the door jamb or strike plate to bring it into the same plane as the hinge side of the door.