Sash Window Repair

Draughts, sticking sashes, decay security issues, and decay are commonplace in older windows made of sash. Many of these problems can be fixed. While some cosmetic issues may require a replacement window, others can be repaired.

Start by scoring the paint with a knife or a utility tool at the point where the sash stoppers meet the frame. Then, pull upvc windows handles out. Knot the cords to prevent them from pulling into the pockets of weight and then remove the sash hardware placing it in a labeled bag.

Weatherstripping

If your old sash windows aren't working as well as they should, you might want to consider sash window repair. This repair can reduce energy costs by sealing draughts and cracks. This can be accomplished by an expert or a proficient DIYer. However, replacing the sash is an expensive option. In most instances, it is better to repair the glass. In certain situations it is possible to install a new sash without replacing the entire mechanism.

A sash is the sliding part of a double-hung windows, allowing you to open and shut it. Sash windows that have been damaged or worn can let cold air in to your home, causing other problems. Sash repair and restoration can make windows more appealing and energy efficient.

Prior to repairing the sash window, it's important to prepare the frame and sash for the task. Clean the sash, its components and the frame using soap and warm water. It is also recommended to lubricate the pulley axles and the guide rails for the sash. Once the sash is clean and dry it can be removed from the frame. Take off the sash cords and chains and replace them with new ones. These are available at most hardware stores. If you're fixing salvaged windows ensure that you keep the balancing weights.

There are a variety of weather strips available to block draughts from entering your home. Foam tapes, felt stripes and V strips are all readily available. Foam tapes consist of flexible, compressed material which is easy to cut using scissors. They tend to be self-adhesive and are efficient in preventing gaps with irregular shapes. Felt strips are sometimes heavier, but they are more difficult to install. V-strips can be made from vinyl or thin, flexible lengths of metal. They can be attached to the wall or nailed to the wall.

Once you've prepared the sash and its components for repair, it's now time to install the new window. Installing a new sash rail can repair a sash not sliding correctly. This new rail should be installed between the top and the bottom of the sash. This new rail will assist to keep the sash in place and will stop it from falling down when you want to close it.

Sash cords

The sash cords (J) that support the window sash in place are sometimes broken. It may only be one side that's damaged, but it's crucial to replace them both when the sash is opened. This will prevent the sash from crashing down in the future and will make it easier to open and close the windows.

The old sash cords must be cut and removed, usually from the top of the frame. The new cord should be passed through the pulleys, cleaned, then sprayed with oil. You can find sash cords at your local hardware stores However, salvaged ones could be needed for older windows.

After the new cord is completed, it needs to be tied to the sash. Then, tie both ends of the cord into its groove. It is also necessary to replace the beads for parting, in the event that they are missing, and then reattach the sash to its jamb liner. Then, you can reinstall the sash stops inside that form a track on the inside of the window and then test the window to ensure it is able to open and close correctly.

Sash cords can break from the force or weight applied to them, and also due to the lack of maintenance, such as cleaning and lubricating. Using the wrong type of cord could cause them to snap or break, too. It is crucial to use a cord kit for sash windows that has balance mechanisms that are spring-based and a tackle that can keep the window from becoming too heavy for the old cords.

If you are replacing sash cords it is recommended to choose a nylon cord and not one made of cotton. It is stronger and more flexible. Think about purchasing new sash cords to go along with your new sash handles and a sashlock that will protect the new sashes against being easily opened or closed by pets or children. Make sure you purchase a sash lock that fits the dimensions of your window, since it will not work on all styles of windows.

Sash stops

Sash window stops are tiny little pieces that are not noticeable and can make a big impact on the performance and safety of your windows. They can help prevent the windows from crashing and offer better ventilation options, and they can also be used as security devices for children.


There are several different types of sash stop available and each is unique in its function. A friction sash-stop, as an instance, creates tension to prevent the window from moving past the specified threshold. This is useful for older windows that can easily slam shut, and it can also reduce energy costs.

Another type of sash stop is morticed sash stops which can be locked into the open position to allow for ventilation. They are typically attached to the upper rails of the windows. They can be locked with a key. However, they aren't as secure as other types of sash stops.

A sliding sash-stop is similar to morticed stops, however it can be moved in different positions. This allows the window to be shut and opened but it isn't able to be raised more than necessary. This is especially important for homes that have young children as it can prevent accidents and injuries.

To install the sliding sash stop first, cut a line between the sash stop and frame using the help of a utility knife. Then you can use a flat screwdriver to pry the sash up. This is a risky step because sash stops are easily damaged. After the sash stop has been removed, put it to the side and then prepare to install a new one.

Pam's Window Repair is the best sash repair company in Fairmount. Our experts will help you restore your windows to a secure and efficient operation. Call us today to set up an appointment. We'll give you a free estimate and answer any questions that you may have regarding sash windows. We are proud to serve the Fairmount, PA area and are committed to delivering high-quality work.

Sash Weights

Sash weights keep double-hung windows from moving up and down. They are typically connected via cords that pass through the wells for weights of the window frame. To access the weights, look for small access panels that open into the frame of the window. The panel could be a rectangle that is scribbled into the frame of the window, or knockout. If you are unable to locate the panel, you'll need to remove a part of the window frame to get the weights.

If the sash doesn't close properly, it's likely that the sash's weights aren't in the right balance. It's important to balance the sash and weights, so you can easily lower and raise the window. It is necessary to reset the balance shoes (the pin is located in the middle of your window's bottom frame). This can be done by inserting a flathead screwdriver into the balance shoe and then turning it upwards until it locks into the "U" position. The sash can be reset by inserting a flathead screwdriver into the balance shoe and turning it up until it locks into the "U" position.

After resetting your balance shoe, you'll be required to attach the new sashcords, and then reattach the sashrails. After that, you should be able to open and close the window without difficulty. If the sash doesn't stay open, you may need to replace the cords or weights.

Depending on the age of the window, you may require re-taping the pockets or sash guides. You can also seal the gaps between the beads using decorator caulk. Use lead sash weights if the top sash appears be loose.

Start with the bottom of the sash and begin to work your way up. First, remove the sash stops and then take out your window sash. Once you've removed the sash, remove the chains or cords and put them in a bag that is labeled. You could also use a heat gun to soften the old putty, and then scrape it off using the blade of a putty. Once you have the hardened putty removed, you are able to install your new sash.